Table of Contents
Advertisement
The input screen is displayed.
Step 3. Change the IP address (IP Address) and array microphone name (ArrayMic Name).
The IP address change is made to match the control unit's IP address. For control unit IP address
settings, please refer to the instruction manual enclosed with the unit.
Also, AM-1 system icons that have already been set can be deleted using the "Delete Microphone
Settings" button.
Note: Up to 16 alphanumeric characters and symbols can be used for array microphone names.
3
Step 4. Tap the "OK" button.
The display returns to the Edit screen.
Step 5. Tap the "Done" button at the upper right of the Edit screen.
The Edit screen is closed, returning the display to the initial Advanced mode screen.
4
5
12
Advertisement
Table of Contents
