Security - Siemens SL75 Manual

of SL75 Hydra FUG, w/o ptt, us-en, A31008-H3300-A1-1-7619 (06.10.2005, 15:39)
right page (87)

Security

Settings
¢
C
¢
Auto key lock
The keypad is locked automatically
if no key has been pressed for a
specific (pre-determinable) time.
This prevents the phone from being
used accidentally. However, you
can still receive calls and make an
emergency call.
H
J
ProSlide lock
Enable/disable automatic keylock
when closing the slider. The keys are
always unlocked automatically when
opening the slider.
Additional information
The keypad can also be locked and
unlocked directly in standby mode.
In each case:
#
¢
Security
T
Select function.
Select Set.
Enter time in minutes
and seconds after which
the keypad lock is to be
activated.
Press and hold
.
Direct call
(Phone-code protected)
Only one phone number can be
dialled (page 33).
Only
¡
(PIN2 or phone-code protected)
Dialling options are restricted to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually
before dialling.
If the SIM card does not support PIN2
input, the whole Phonebook can be
protected with the phone code.
This SIM only
(PIN2 or phone-code protected)
The phone can be connected to a
SIM card once the phone code is en-
tered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a
different SIM card, enter the phone
code when requested.
Settings 87
b
b