Getting Started; Inserting Sim Card/Battery - Siemens SL75 Manual

of SL75 Hydra FUG, w/o ptt, us-en, A31008-H3300-A1-1-7619 (06.10.2005, 15:39)
right page (15)

Getting started

Your phone's display is covered with
a protective film. Remove this before
using the phone.
Inserting SIM card/
battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Place the SIM card in front of the
slot with the contacts facing
downwards. Then push the SIM
card fully into the holder using
gentle pressure
the chamfered corner is in the
correct position.
In rare cases static
discharge can
cause temporary
discoloration in
the display.
However, this
will disappear
within approx.
10 minutes.
1
. Ensure that
Getting started
1
• Insert the battery into the phone
with the retaining lugs beneath
2
the camera lens
3
down until it clicks into place.
3
• To remove, press the catch
4
down until the battery springs
out a little, and then remove
5
4
15
and then press
2
5
.