Siemens SL75 Manual page 6

of SL75 Hydra FUG, w/o ptt, us-en, A31008-H3300-A1-1-7619 (06.10.2005, 15:39)
left page (6)
6 Safety precautions
Important
Improper use will invalidate the guarantee!
These safety instructions also apply to
Siemens original accessories.
This cellular phone offers a range of func-
tions, it can be used in positions other than
the head, such as on the body. In this case,
separation distance of 2.0 cm is required.
When a carry case, belt clip or holder is
used for body-worn operation, it should not
contain metal and should position the de-
vice the above-stated distance from your
body.
Do not place the phone near to
electromagnetic data carriers
such as credit cards and floppy
disks. Information stored on
them could be lost.
You may only open the phone
to replace the battery (100%
mercury-free) or SIM card. You
must not open the battery un-
der any circumstances. All oth-
er changes to this device are
strictly prohibited and will inval-
idate the guarantee.
Please dispose of unwanted
batteries and phones as permit-
ted by the laws in your country.
The phone may cause interfer-
ence in the vicinity of TV sets,
radios and PCs.
Use only Siemens original ac-
cessories. This will avoid po-
tential risks to health or proper-
ty and ensure compliance with
all relevant regulations.
Bluetooth ®
Your phone has a Bluetooth interface. This
makes it possible to establish a wireless
connection of your phone with a headset of
a car kit, or with other Bluetooth-enabled
devices.
In order to establish a secure link between
the devices and to prevent a third party from
having access to your phone, you should
observe the following points:
• The initial connection between two devic-
es, called "pairing", should take place in
familiar surroundings.
• Both devices must be able to identify
themselves once by using a password/
PIN. To ensure sufficient security, you
should choose a 16-digit number
combination for a password that would be
difficult to guess (if a PIN has not been
assigned).
• An automatic connection acceptance
("connection without confirmation") should
only be used in exceptional cases.
• In general, only trustworthy devices should
be linked in order to minimize security
risks.
• You should restrict the "visibility" of your
phone if possible. This will make it much
more difficult for unknown devices to es-
tablish a connection with your phone. To
do this, in the Bluetooth menu, set the op-
tion Visib.to others of
Not visible (see page 77).
• The name of your phone is transmitted in
a Bluetooth connection. The factory de-
fault is the "Bluetooth ID". The first time
Bluetooth is activated, or later in the
Bluetooth menu, you can change this
name (My BT name, page 77).
• If Bluetooth is not needed, this function
should be deactivated.
Always visible to