Siemens SL75 Manual page 85

of SL75 Hydra FUG, w/o ptt, us-en, A31008-H3300-A1-1-7619 (06.10.2005, 15:39)
right page (85)
Device manag.
The device manager can be used,
for example, to transfer configura-
tion data from the service provider
via WAP push (page 57).
The phone default setting varies
from service provider to service
provider:
• The settings have already been
implemented by the service pro-
vider. You can start immediately.
• Access profiles have already been
created by your service provider.
Then select profile and activate.
• The access profiles must be con-
figured manually. If necessary,
contact your service provider. You
will also find the current settings
for the service provider on the
Internet at
www.siemens.com/
mobilephonescustomercare
under "FAQ".
Active access
I
§Start§
• Profile active
Select function.
Establish a connection to
the active profile.
After the data has been transferred:
Confirm.
§OK§
• No profile active
The list of profiles is chosen for you
to choose from.
Select profile.
I
Activate the profile.
ì
Or
§Options§
Open menu, then select
and make entries.
§Edit§
Last connection
The data for the last
ö
connection is displayed.
Fact. settings
The phone is reset to the default
values (factory setting). This does
not affect SIM card and network
settings or data saved during Instant
Messaging.
Alternatively, in standby mode
enter:
*
# 9 9 9 9 #
A
Settings 85