SPP-R200III Safety Precautions WARNING Do not plug several products in one multi-outlet. You must use only the supplied adapter. ONLY SUPPLIED ADAPTER PROHIBIT PROHIBIT Do not pull the cable to unplug. Keep the plastic bag out of children’s reach. PROHIBIT...
Page 5
SPP-R200III CAUTION If you observe a strange smoke, odor or noise from Keep the desiccant out of children’s reach. the printer, unplug it before taking following measures. PROHIBIT TO UNPLUG PRINTER Install the printer on the stable surface. Use only approved accessories and do not try to disassemble, repair or remodel it for yourself.
Page 6
SPP-R200III Battery Safety Precautions Make sure to review the user manual carefully prior to product use. Danger - 6 - Rev. 1.00...
Page 22
SPP-R200III 3-9 Using Control Panel Power Button Paper Feed Button Battery Status Lamp (Blue or Red) Error Lamp (Left-sided) Bluetooth Lamp (Green) NOTE - 22 - Rev. 1.00...
SPP-R200III 5. Label Printing Function 5-1 Label Function Setting • Setting Operations • Setting Via Memory Switch 5-2 Auto Calibration Function • Auto Calibration Instructions - 26 - Rev. 1.00...
Page 30
SPP-R200III 8-2 Certification 1) WEEE (Waste Electrical and Electric Equipment) 2) Rating Label Symbol Information 3) This equipment is indooruse and all the communication hiring are limited to inside of the building. 4) The switch is the disconnecting device. Turn off switch from any hazard.
Page 31
SPP-R200III Disposal Directions Recommendation for Charging FCC compliance Information Information to the user 8-3 Label Types - 31 - Rev. 1.00...
Need help?
Do you have a question about the SPP-R200III and is the answer not in the manual?
Questions and answers