Gigaset 4000 Classic, IM1 eng, A31008-G4000-B001-2-6Z19
Registering the handset
To make calls with your handset, you must "intro-
duce" it to its base station (registering)
if your handset has already been registered at a dif-
ferent base station (steps 1, 2 and 3),
if you want to register the handset as a new hand-
set at a Gigaset base station of an older Gigaset
range (steps 1 and 3).
Step 1: On the base station or base telephone
On the base station/base telephone
Hold down the key on the underside
of the base station.
Hold down the paging-key
base station (for about 10 seconds) un-
til you hear signal tones.
the base station telephone and con-
Press the LED – it will flash during
To register at "GAP base stations" , fol-
low the relevant operating instructions
(step 2 and 3).
Step 2: On the handset:
Step 3: On the handset:
Once you have entered the system PIN the handset
will search for a base station with this PIN. During the
it has been registered successfully, the handset will
revert to its idle status. Your handset is now ready
Open the menu.
Select the menu item and con-
The PIN is displayed.
Enter the 4-digit system PIN and
will flashes on the display. When
in the menu at