Using Keyguard - Kyocera pdQ2 User Manual

pdq2_QuickStart.book Page 11 Friday, July 28, 2000 6:37 PM

Using Keyguard

Keyguard protects your pdQ
phone power is on but you are not on a call, Keyguard engages
automatically. It remains on until you either turn it off or answer a call.
To turn on Keyguard manually
Phone On
Flip Closed
Press the backlight button on the top of the phone.
The phone enters Power Save mode. The phone is on, but the screen
is blank and the keypad is locked. You can also turn on Keyguard
from the flip-closed menus. Select Settings, then Keyguard.
If you receive a call while Keyguard is turned on
Press to answer the call. Keyguard is turned off.
To turn Keyguard off
You can turn Keyguard off using any of these methods.
Press the backlight button on the top of the phone.
Press , followed by the digits 1, 2, 3.
Open and close the flip.
For more information, see "Using Keyguard" in the pdQ
CD-ROM.
Introducing the pdQ
2
from accidental key presses. When the
DRAFT
2
2
Reference Guide on the
11