Keyguard; Storage Settings - Kyocera DuraTR User Manual

Keyguard

This feature enables you to prevent unintended operations by accidentally pressing them. You can place
a 911 call (see Call Emergency
You can set the keyguard feature from the settings menu so that it is enabled every time the screen
backlight goes off in standby mode.
1. From home, press
2. Select On.
To unlock the keys and buttons when the keyguard feature is on:
■
Press and then press
To lock the keys and buttons when the keyguard feature is off:
■
Press and hold
Note: The keyguard feature will be temporarily disabled when you receive an incoming call or certain
notification such as an alarm. It will be automatically enabled again if you leave the phone without
responding to the call or notification.
Note: Once a lock type is set to PIN or Password, the keyguard feature will be disabled. (See
Screen Settings.)

Storage Settings

The storage settings menu lets you manage internal storage on your phone and provides menu choices
for an optional SD card (not included).
View Memory Information
1. From home, press
2. Review your storage settings by pressing the navigation key up or down.

Phone: View the total space, available space and space used by specific features on your
phone's internal storage.

SD card: View total space and available space memory usage on an optional installed
memory card.
•
Mount SD card: Prepare a memory card for use as storage in the phone. This option is
only displayed if a memory card is installed. Select this setting to mount the card and
make it available for use.
•
Unmount SD card: Prepare an installed memory card for safe removal. Select this
setting and press Yes (left softkey) to unmount the card to allow for safe removal.
Device Settings
Numbers) even when the keyguard feature is on.
> Settings > Device > Keyguard.
.
.
> Settings > Device > Storage.
Lock
97