Panasonic DP-MB311EU Operating Instructions Manual page 77

Feature Code
Fax number #422
re-entry
Confirming the #424
next document
Direct SMTP #425
Delivery notice #426
POP timer setting #428
Fax send notify #429
Auto reduction #432
Fax activation #434
code
Selection
When "ON" is selected, if you dial a fax number manually using the dial keypad,
you have to re-enter the number and press MxN. When the 2nd entry number
matches the 1st entry number, you can send the fax.
M0N "OFF" (default)
M1N "ON"
When "ON" is selected, after the document is scanned using the automatic
document feeder during fax memory transmission, the message shows to confirm
the next document. Insert the next document and press MOKN. A MxN
M0N "OFF" (default)
M1N "ON"
For registering an email address when "ON" is selected, you can set the direct
SMTP for the email address.
M0N "OFF" (default)
M1N "ON"
When "ON" is selected, a delivery notice is sent to the receiver of the Internet fax.
If the receiver returns the notice, a sending report will be printed.
M0N "OFF"
M1N "ON" (default)
To set the POP timer.
1. MtN A MBNM4NM2NM8N
2. Set the POP timer (the interval of receiving Internet fax automatically) to a
value between "00" and "60" minutes using the dial keypad.
R The default is "03" minutes.
R If you do not want to receive an Internet fax automatically (page 65), set
the timer to "00".
3. MOKN A MtN
To set the unit to alert you with a beeping sound after fax transmission is finished.
M0N "OFF" (default)
M1N "ON"
To receive a fax document that is longer than your recording paper. When "ON"
is selected, the unit will fit received documents onto your recording paper.
M0N "OFF"
M1N "ON" (default)
If you wish to use an extension telephone to receive faxes, activate this feature
and program the activation code.
M0N "OFF"
M1N "ON" (default)
Important:
R The fax activation code must be different from the code that you
programmed on the answering machine.
To change the fax activation code
1. MtN A MBNM4NM3NM4N
2. M1N A "ON" A MOKN
3. Enter your code from 2 to 4 digits, using 0-9, MGN and MBN.
R The default code is "H#9".
4. MOKN A MtN
10. Programmable Features
77