Interface; Mechanical (Easy Aimer Model) - Siemens SITRANS LR260 Operating Instructions Manual

Influence of ambient temperature
Dielectric constant of material measured
• Minimum dK
Memory:
• non-volatile EEPROM
• no battery required.

Interface

Analog output
• signal range
• fail signal
• load
Communication: HART
• Load
• Max. Line Length
• Protocol
Configuration
2)
Display (local)

Mechanical (Easy Aimer model)

Materials
• flange and horn
Process Connections:
• universal flanges
Horn:
• 2" horn
• 3" horn
• 4" horn
Enclosure
• construction
• conduit entry
• ingress protection
Dust cap (optional)
• 2"
• 3"
• 4"
1)
HART® is a registered trademark of HART Communication Foundation.
2)
Display quality will be degraded in temperatures below –25 °C (–13 °F) and above +65 °C (+149 °F).
3)
Universal flange mates with EN 1092-1 (PN16)/ASME B16.5 (150 lb)/JIS 2220 (10K) bolt hole
pattern.
7ML19985KE03
< 0.003%/K (average over full temperature range,
referenced to maximum range)
= 1.6 (depending on antenna and application type)
4 to 20 mA (±0.02 mA accuracy)
upper limit 20 to 23 mA adjustable
3.6 mA to 23 mA; or last value
Max. 600 
230 to 600 230 to 500 when connecting a
coupling module
multi-wire:  1500 m (4921 ft)
HART
Siemens SIMATIC PDM (PC), or
Siemens Milltronics infrared handheld programmer,
or HART handheld communicator
graphic LCD, with bar graph representing level
304 stainless steel
3)
2"/50 mm, 3"/80 mm, 4"/100 mm, 6"/150 mm
aluminum, polyester powder-coated
2 x M20x1.5, or 2 x ½" NPT
Type 4X/NEMA 4X, Type 6/NEMA 6, IP67, IP68
PTFE, pipe clamp connection, O.D. 50 mm (1.97")
PTFE, pipe clamp connection, O.D. 75 mm (2.95")
PTFE, pipe clamp connection, O.D. 100 mm (3.94")
SITRANS LR260 (HART) – INSTRUCTION MANUAL
1)
, Version 5.1
Page 7