Exchanging Data Via Nfc - Pantech Perception User Manual

To release the External memory connection, tap Turn off USB storage. If
the screen in question is closed, open the Notifications panel and tap Turn
off USB storage to get back to the screen.
Note
While the External memory connection is active, the smartphone
cannot access the memory card.

Exchanging Data via NFC

Near Field Communication technology allows users to exchange data, such
as a contact or webpage, between NFC-enabled smartphones. An example
is the Browser.
1. Go to Settings > More, then turn on both NFC and Android Beam.
In Starter mode: Settings > System > More
2. Launch the Browser and open a webpage.
3. Bring the smartphone into contact with another smartphone back to
back.
4. Tap Touch to beam that appears on the screen. The same webpage is
opened on the other smartphone.
Note
The NFC antenna is located on the lower half of the back cover. Use the
center of the area to get the best performance.
50 Basic Operations
Align this point with an NFC device.