Table of Contents
Advertisement
Safety Information
USB
The connection to USB interfaces has to be limited to USB 2.0 version or
higher. The connection to so called power USB is prohibited.
Battery
For safe use of the battery, observe the following instructions:
a. Caution risk of explosion if battery is replaced by an incorrect type.
b. Dispose of used batteries according to the instructions.
c. Do not disassemble or open crush, bend or deform, puncture or shred.
d. Do not modify or remanufacture, attempt to insert foreign objects into
the battery, immerse or expose to water or other liquids, expose to fire,
explosion or other hazard.
e. Only use the battery for the system for which it is specified.
f. Only use the battery with a charging system that has been qualified
with the system per CTIA Certification Requirements for Battery System
Compliance to IEEE1725. Use of an unqualified battery or charger may
present a risk of fire, explosion, leakage, or other hazard.
g. Do not short circuit a battery or allow metallic conductive objects to
contact battery terminals.
h. Replace the battery only with another battery that has been qualified
with the system per this standard, IEEE-Std-1725. Use of an unqualified
battery may present a risk of fire, explosion, leakage or other hazard.
i. Promptly dispose of used batteries in accordance with local regulations
j. Battery usage by children should be supervised.
Appendix 177
Advertisement
Table of Contents
