Uconnect 5.0/5.0 NAV Owner's Manual Supplement page 87

86 NAVIGATION
Creating POIs
1. Press the touchscreen to open the Main menu.
2. Press the "Settings" button.
3. Press the "Manage POIs" button.
4. If there are no POI categories or the one you want to use
does not exist, Press the "Add POI" category and create
a new category.
Every POI must be assigned to a POI
category. This means you need to
have created at least one POI cat-
egory before you can create your first
POI.
You can only add POIs to POI categories you have created.
For more information on creating POI categories, read
"Managing POIs."
5. Press the "Add POI" button.
6. Select the POI category you want to use for the new POI.
7. Press a button to enter the POI address in the same way
that you plan a route.
8. The POI is created and saved in the selected category.
Using POIs To Plan Route
When you plan a route, you can use a POI for the
destination or as a waypoint.
The following example shows how to plan a route to a
parking lot in a city:
1. Press the "Drive to" button.
2. Press the "Point of Interest" button.
3. Press the "POI in city" button.
NOTE: The last POI you viewed on your navigation
system is also shown in the menu.
4. Enter the name of the town or city and select it when it
is shown in the list.
5. Press the arrow button to expand the list of POI catego-
ries.
NOTE: If you already know the name of the POI you want
to use, you can press the "Search by name" button to enter
the name and select this location.
6. Scroll down the list and press the "Parking lot" button.