Direct Tune; Setting Presets - Uconnect 5.0/5.0 NAV Owner's Manual Supplement

Direct Tune

The Direct Tune touchscreen is available in AM, FM and
SXM — If Equipped radio modes and can be used to direct
tune the radio to a desired station or channel. Press the
"Tune" button located at the bottom of the radio screen.
Press the available number button to begin selecting a
desired station. Once a number has been entered, any
numbers that are no longer possible (stations that cannot
be reached) will become deactivated/grayed out.
If you accidently entered the wrong station number, press
the "CLR" button to clear the radio station numbers and
re-enter the correct station number.
Once the last digit of a station has been entered, the Direct
Tune touchscreen will close and the system will automati-
cally tune to that station. The selected Station or Channel
number is displayed in the Direct Tune text box.

Setting Presets

The Presets are available for all Radio Modes, and are
activated by pressing any of the four "Preset" buttons,
located at the top of the screen.
RADIO MODE 23
4