Uconnect 5.0/5.0 NAV Owner's Manual Supplement page 70

About Waypoints
You can choose to use waypoints for any of the following
reasons:
• You want to travel along a certain road or through a
certain area on the way to your destination.
• You want to make stops before reaching your final
destination.
When you enter a city center as a waypoint, the route
planner will plan a route via the area around this city, not
via the location of the city center. The route planner may
fail to find a route via a city center that has an awkward
location w.r.t. the current route.
Adding The First Waypoint To Your Route
To add the first waypoint to your route, do the following:
1. Press the touchscreen to bring up the Main menu.
2. Press the "Change route" button.
3. Press the "Travel via" button.
NOTE: You can also use Voice control to add Waypoints.
4. Choose the location for your waypoint from a choice of
Home, Favorite, Address, Recent destination, POI,
longitude/latitude, or position of last stop.
On the route summary screen, a message confirms that
the route is being recalculated to include the waypoint.
In the Change route menu, the Travel via button
changes to show that you now have one waypoint on
your current route.
NOTE: The maximum number of waypoints you can add
is three.
Adding Further Waypoints To Your Route
To add more waypoints to your route after the first one has
been added, do the following:
1. Press the touchscreen to bring up the Main menu.
2. Press the "Change route" button.
3. Press the "Travel via" button.
NOTE: You can also use Voice control to add waypoints.
4. Press the "Add" button.
NAVIGATION 69
9