Zte ZXHN H168NW User Manual page 17

ZXHN H168NW User Manual
Table 3.1-2 Description of Interfaces on the Rear Panel and Left
Item
RJ-11 interface: The equipment is connected to the
DSL VDSL2 by a network line or a splitter through a
telephone line.
RJ-45 interface: It is connected to a PC or other
network devices by a network cable.
LAN1-
LED: The equipment negotiates and changes over to
LAN4
the gigabit mode when LED is on. The equipment
negotiates to the 10/100M mode when LED is off.
RJ-45 port: It is connected to the modem or other
WAN
network devices.
POWER Power interface. It is connected to the power adapter.
At the power-on state, the system will be restored to
Reset the default configurations if the button is pressed over
5 seconds.
USB USB port
Wireless switch: The wireless LAN will be switched on
WLAN
if the button is pressed over 3 seconds.
WPS switch: The WPS will be enabled if the button is
WPS
pressed over 3 seconds.
On/Off Power switch
Panel
Specifications
10