About this guide. Thanks for choosing to install firmware version 2.4. The following instructions will assist you in updating your Genie to the latest release. It also outlines some of the new features and previous bug fixes. This release has both known and potentially unknown bugs. Although it should be fully functional it has not been fully tested and we expect there to be additional fine tuning of the code required.
Release notes. The software is provided on an “as is” and “as available” basis. Syrp does not give any guarantees as to the suitability or usability of the firmware. Syrp will not be liable for any loss, whether such loss is direct, indirect, special or consequential, suffered by any party as a result of their use of the firmware release.
In time-lapse mode this feature is useful to continue your time-lapse recording in the reverse direction meaning you’ll never miss that crucial shot. 2. Genie will now start and stop recording on LANC compatible cameras.
** Please note that uploading new firmware will wipe all existing presets and settings on the Genie. If you wish to keep settings please make a note of them and reinstall after update. *** If the red indicator light around the OK button stays solid red then the firmware has not correctly installed.
3. Return to home function is a few degrees or Centimeters out. 4. The issue whereby the battery would not fully charge on one charge cycle is fixed but requires the Genie to be turned ON while charging. The Genie will still enter standby mode as per normal.
Need help?
Do you have a question about the genie and is the answer not in the manual?
Questions and answers