Table of Contents
Advertisement
6. Getting started
6.1 Inserting alkaline/rechargeable
batteries
-CAUTION-
– Observe the polarity of the batteries.
(refer to symbols inside the battery com-
partment.)
– Make sure the battery compartment is
properly locked.
1. Press the cover of the battery compart-
ment lightly.
2. Slide the cover out and off.
3. Replace the batteries.
-NOTE-
For alkaline batteries
– Always replace a complete set of batter-
ies.
– Do not mix used and new batteries.
– Do not mix batteries of different makes
or types.
– Use only undamaged batteries of an
approved type.
For rechargeable batteries
– Always use rechargeable batteries of the
same make and same type.
– Always use rechargeable batteries of the
same age and charged to the same level.
– New rechargeable batteries are supplied
uncharged and have to be charged prior
to first use.
– Use only 1.2 V NiMH batteries with
1500–2000 mAh capacity.
6.2 Battery charging
6.2.1 Standard battery charging
The charging process ensures that there
will be virtually no "memory effect". In
view of this, charging can begin at any time
regardless of the level to which the battery
is already charged.
Attach the PDAW 80/81-1 charging adapter
to the range meter
For charging, connect either the mains
adapter or the car battery plug
charging adapter.
1
The maximum charging time is 12 hours.
As with many mobile phones, the level of
charging is shown by movement of battery
display segments.
6. Getting started
.
to the
2
2
11
Hide quick links:
Advertisement
Table of Contents
