Interface - Camera; Ports On Panel; Internal Usb 2.0 Port; Led Drivers - EVT EC5000 Manual

4. Interface – Camera

4.1 Ports on Panel

The EC 5xxx series includes camera and I/O module. They are connected with a HDMI
cable (5 meters, with M3 setscrew). This customized cable is soft, with flexural endurance
and oil resistivity for robot arm and cable chain.
The camera supports standard HDMI display port for displaying on monitor with HDMI
port, supporting resolution from VGA (640x480) to 1080P.
Notice: the 3-meter HDMI cable with M3 setscrew may not match all monitors because of
the connector size. Some monitors are ensured to match the cable.
The ports for I/O module and HDMI monitor look the same. However EVT provides fault-
tolerant design which allows misplug without any damage to the camera.

4.2 Internal USB 2.0 Port

This USB 2.0 port is hidden inside the camera casing. User can use this port only when
opening the rear panel.
This internal USB port is designed for encryption USB dongle to avoid misplug.

4.3 LED Drivers

EVT provides constant current LED drivers on both, camera and I/O module with
adjustable current (LED brightness) for machine vision applications, which reduces system
costs and increases system stability.
The internal LED driver has max output 300mA/24V for EVT-designed illuminator only.
EVT GmbH, Haid-und-Neu-Str. 7, 76131 Karlsruhe, Germany www.evt-web.com, info@evt-web.com
Tel.: 0049 721 668 004 23 0