System Block Diagram - EVT EC5000 Manual

Note:
[1] The power consumption of the camera is 12W max. However, it takes more power
consumption when using I/O module for external LED driving. So switching power with
over 80W is recommended.
[2] After being placed in the environment of -40°C for 12 hours, the camera can be
started and run for 24 hours. The camera can run for 48 hours in the environment of
+80°C. The camera can run for 48 hours in the cyclic environment (5 hours for a cycle) of
the temperature form -40°C to +80°C.
[3] The RTC runs for 4 weeks by the internal recharged battery, so time value must be set
again when the camera power supply is cut off more than 4 weeks.

3.5 System Block Diagram

The block diagram of EyeCheck 5xxx series is as follows:
EVT GmbH, Haid-und-Neu-Str. 7, 76131 Karlsruhe, Germany www.evt-web.com, info@evt-web.com
Tel.: 0049 721 668 004 23 0