Rs232 Ports; Ethernet Port; Usb2.0 Ports; Power Button - EVT EC5000 Manual

This output delay time may be variable because of OS thread scheduling and user
programming style, usually range from 0.1ms to 1ms.

5.5 RS232 Ports

There are two RS232 ports (standard DB9 connector) with mark "RS232-1" and "RS232-
2". The two RS232 ports have only RX/TX signals for external devices like PLC, with
supporting baud rate (bps): 230400, 153600, 115200, 57600, 19200, 9600, 4800, 2400,
600, 300.

5.6 Ethernet Port

There is a Gigabit Ethernet marked with "GigaEthernet". This port is used to connect with
PC or PLC. Also, it can connect with other GigE cameras. PoE (Power over Ethernet)
function is not supported.
If working in Gigabit mode, CAT-6 or CAT-6E cable is recommended for a better
performance. The default IP address is 192.168.1.218.

5.7 USB2.0 Ports

There are three USB2.0 ports marked with "USB1", "USB2", "USB3". These USB ports are
for connecting keyboard, mouse, USB flash drive and other general USB external devices.
The output power of each port is 5V/0.5A.

5.8 Power Button

There is a self-lock push button marked with "POWER". The OS is highly customized to
avoid accident from power failure, which means all cameras are able to work on
production line with frequent power off without shutting down OS from desktop.
EVT GmbH, Haid-und-Neu-Str. 7, 76131 Karlsruhe, Germany www.evt-web.com, info@evt-web.com
Tel.: 0049 721 668 004 23 0