Table of Contents
Advertisement
5. Interface – I/O Module
5.1 Camera Port
The port marked with "Camera" is for connection with the camera. With a customized
cable, the camera can be connected with I/O module for ports extension. The cable is 5
meter long with M3 setscrews. Also available 8 meter cable on request.
5.2 Power Port
The 8-pin port marked "POWER" is the power port. This connector is compatible with
16-24 AWG wire. The 8-pin power port includes power input, trigger input, LED driver
output and casing Earth.
5.2.1 Power Input
The power input ports marked with "0V" and "24VDC", support 20 to 30VDC (24VDC is
recommended) input. This port supports reverse polarity protection, undervoltage
protection, overvoltage protection and surge protection.
The power consumption of the camera is 12W max. However, it takes more power
consumption when using I/O module for external LED driving. So power supply with over
24V/24 is recommended.
EVT
GmbH, Haid-und-Neu-Str. 7, 76131 Karlsruhe, Germany
www.evt-web.com,
info@evt-web.com
Tel.: 0049 721 668 004 23 0
Advertisement
Table of Contents
