Table of Contents
Advertisement
5.3 General Input Port
The general input port is a 9-pin port marked with "INPUT". It is compatible with 16-
24AWG wire.
There are 8 photo-isolated general input ports, they can input 5V/12V/24VDC signal
directly with no need for an external current-limiting resistor. -30V to +1V is recognized as
low level, and +2.8 to +30V is recognized as high level, with input current below 2mA;
voltage out of range from -30V to +30V may damage the circuit.
It is recommended to use PNP output type sensors, switches or PLC.
EVT
GmbH, Haid-und-Neu-Str. 7, 76131 Karlsruhe, Germany
www.evt-web.com,
info@evt-web.com
Tel.: 0049 721 668 004 23 0
Advertisement
Table of Contents
