Operation: Fitment Receiver Collar - ObeDog Stride Manual

Beep Test
 Press Mode Button on the Remote Transmitter and select Beep Mode.
 Press Command button, the Receiver will beep indicating the Beep feature works.
 LED Light Test
 Press Mode Button on the Remote Transmitter and select LED Light Mode.
 Press Command button, the LED on the Transmitter will flash indicating the LED Light works.
Fitment
IMPORTANT: Proper fitment and placement of the ObeDog Stride / Stride Dual Collar is important for effective training.
The fitment must be snug but yet loose enough to allow one finger space between the strap and your dog's neck. The
Contact Points must have direct contact with your pet's skin on the
underside of his neck.
To ensure a proper fit, please follow these steps:
1. Have your pet standing comfortably (3A).
2. Center the Contact Points beneath your dog's neck and touching the skin (3B). If your pet has a long
or thick coat, please use the longer Contact Points, we enclosed 2 sets Contact Points both short ones and longer ones.
3. The Collar should fit snugly, yet loose enough to allow one finger space between the strap and your dog's neck.
4. Allow your pet to wear the collar for several minutes then recheck the fitment again as your pet becomes more
comfortable with the Collar.
Operation
9 | P a g e