Key Definition - ObeDog Stride Manual

ObeDog Stride / Stride Dual
1. Antenna – Transmits signal to the Receiver Collar(s)
2. Led Light – Illuminates by pressing the LED light button
3. Indicator Light - This light will flash when instructions are sent to the Receiver Collar or when the transmitter is being
charged
4. LCD Display
5. UP/DOWN Button - Intensity Level Button for Vibration and Static Shock Stimulation
6. LED Light Button – Activates the LED Light on the transmitter
7. Channel Button – Select which Receiver Collar to receive instructions
8. Command Button – Send commands to the Receiver Collar
9. Mode Button – Select between 4 modes (Vibration, Static Shock, Beep and Locate)
10. Charging Jack
LCD Icons
A. Static Shock Mode: Receiver Collar will deliver a Static Shock at set level.
B. Vibration Mode: The Receiver Collar will vibrate at set level.
C. Beep Mode: The Receiver Collar will "Beep" to locate or call for your pet.
D. Locate Mode: GREEN LED light on Receiver Collar will flash every 1 second to locate your pet.
E. Low Battery Mode: Indicators when battery needs charging.
F. Channel 1: Select to deliver instructions to Receiver Collar 1
G. Channel 2: Select to deliver instructions to Receiver Collar 2
Key Definition
5 | P a g e