Setup/Operation Guide; Setup: Remote Transmitter; Operation: Remote Transmitter; Setup: Receiver Collar - ObeDog Stride Manual

Setup / Operation Guide
ObeDog Stride / Stride Dual Training Collar Setup / Operation Guide

Setup: Remote Transmitter

Preparing the Remote Transmitter for First USE:
Charge the Remote Transmitter for approximately 30 – 45 minutes
Connect the charger to the charging jack and plug the charger into a standard outlet
The red LED should be lit which indicates charging
Once it is fully charged, the LED will turn off automatically
Low battery indicator: the symbol will show up on the right downside of LCD screen when it needs to be recharged.

Operation: Remote Transmitter

1. To turn On/Off the remote transmitter simply hold the Mode Button for 5 seconds.
2. Access different modes by pressing the Mode Button. The LCD images will change between
3. To select different Vibration or Static Shock Correction levels, press the Up/Down Buttons on the right side of the
remote transmitter.
4. Press the Channel Button to select between 1 or 2 Receiver Collars. (Applicable to Dual Models with 2 Receiver
Collars or if one choose to upgrade in the future)
5. The Remote Transmitter will go into STANDBY MODE if not operated for 2 minutes and will TURN OFF if not operated
for 5 minutes.
6. In STANDBY MODE, press any button (except LED light button) to wake the transmitter.
7. If the transmitter is TURNED OFF, hold the Mode Button for 5 seconds to TURN ON the unit.

Setup: Receiver Collar

Preparing the Receiver Collar for First USE:
Charge the Receiver Collar for approximately 30 - 45 minutes
Open the rubber cover and connect the charger connector into the charging hole
Plug the charger into a standard outlet
The red LED should be flashing which indicates charging is in progress
Once it is fully charged, the LED will turn off automatically
7 | P a g e