Advertisement
ON-OFF & Intensity Dial
This Dial is to turn the Collar ON/OFF and select the intensity level of stimulation.
To turn the Ergo-X OFF, simply turn the dial to the "OFF" position.
Level V – The Collar will deliver Vibration Stimulation only.
Level 2 is lowest Static Shock Stimulation and Level 7 is the highest.
Level 2 to Level 7, the Collar will Vibrate first and then follow by Static Shock Stimulation.
Sensitivity Dial
• This dial is to adjust the sensitivity to the Dog's Bark in accordance to your surroundings.
• Level T is the most sensitive and used for Testing. When testing the Collar set it to the level T.
• Adjust between Level 1-6 where Level 1 is the least sensitive and 6 the highest.
LED Indicator Light
When the Ergo-X Collar is active, the Green LED light will flash every 2 seconds. If your dog does not bark over 10
seconds, it enters Sleep Mode. In Sleep mode, a bark will activate the Collar.
Auto-Protection Mode
If the Ergo-X is activated for 5 times continuously, it will enter into Auto-Protection Mode. It will enter into Sleep Mode and
the LED indicator will turn off.
ObeDog Ergo-X No Bark Collar: 3.7V 180mAh Lip
Setup / Operation Guide
5 |
P a g e
Advertisement
