User Guide; Introduction; Package Contents; Intended Use - iHealth BP3 User Manual

INTRODUCTION

Thank you for selecting the iHealth Wireless Blood Pressure Monitor. The iHealth Wireless Blood Pressure Monitor is a fully
automatic arm cuff Wireless Blood Pressure Monitor that uses the oscillometric principle to measure your blood pressure and
pulse rate. The monitor works with your mobile device to test, track and share vital blood pressure data.

PACKAGE CONTENTS

* 1 iHealth Wireless Blood Pressure Monitor

* 1 User Guide

* 1 Quick Start Guide
* 1 Charging Cable

INTENDED USE

The iHealth Wireless Blood Pressure Monitor (Electronic Sphygmomanometer) is intended for use in a professional
setting or at home and is a non-invasive blood pressure measurement system. It is designed to measure the systolic
and diastolic blood pressures and pulse rate of an adult individual by using a technique in which an inflatable cuff is
wrapped around the upper arm. The measurement range of the standard cuff circumference is 8-21/32" to
14-3/16"(22cm-36cm).
Note: Consult your physician for proper interpretation of blood pressure results.

CONTRAINDICATION

It is not recommended for people with serious arrhythmia to use this Wireless Blood Pressure Monitor.

PARTS AND DISPLAY INDICATORS

SETUP REQUIREMENTS

The iHealth View Wireless Blood Pressure Wrist Monitor is designed to be used with the following iPod touch,
iPhone and iPad models:
iPhone4s+
iPad Air+
iPad mini+
iPad 3+
iPod Touch5
Please note that the compatible devices are subject to change. For the latest compatibility list（include Android
devices), visit www.ihealthlabs.com/support

SETUP PROCEDURES

Connect the cuff to BP3L
Insert the cuff tubing connector into the air port in the left side of the monitor. Make
sure that the connector is completely inserted to avoid air leakage during blood
pressure measurements.