Product Description And Specifications; Intended Use; Product Features - Bosch 3 601 M23 630 Original Instructions Manual

34 | English
Symbols and their meaning
For adjustment of random mitre angles, the saw table must
move freely and the mitre detent override must be blocked:
– Pull lever  and at the same time push the mitre detent
override  downward at the front.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. In this, hori-
zontal mitre angles from –52° to +60° as well as vertical bevel
angles from 47° (leftward) to 47° (rightward) are possible.
The capacity of the power tool is designed for sawing hard-
wood and softwood, as well as particle and fibre board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Dust bag
2 Extraction adapter
3 Laser warning label
4 Handle
5 Locking lever
6 Blade guard
7 Transport handle
8 Retracting blade guard
9 Fence extension
10 Fence
11 Saw-table extension
12 Mounting holes
13 Insert plate
14 Mitre detent override
15 Locking knob for various mitre angles
16 Mitre detent lever
17 Bevel lock lever
18 Detents for standard mitre angles
19 Recessed handles
1 609 92A 285 | (11.11.15)
20 Hex key (6 mm/4 mm)
21 Hex key (2 mm)
22 Material clamp
23 Roller
24 Right bevel angle indicator (0° to 47°)
25 Chip deflector
26 Glide mechanism lock lever
27 Laser protection cap
28 Glide arm
29 Adjusting screw of depth stop
30 Depth stop
31 Transport safety-lock
32 Scale for bevel angle
33 Left bevel angle indicator (47° to 0°)
34 Adjustment knob for 22.5° bevel angle
35 Lock screw of the material stop
36 Material stop
37 Scale for mitre angle
38 Saw table
39 Rotary knob for adjustment of the bevel angle range
40 Saw blade
41 Chip ejector
42 Locking screw of linkage 43
43 Linkage of the retracting blade guard
44 Front fastening screw (cover plate/retracting blade
guard)
45 Rear fastening screw (cover plate/retracting blade
guard)
46 Cover plate
47 Spindle lock
48 Hex socket screw for mounting of saw blade
49 Clamping flange
50 Interior clamping flange
51 Clamping lever of the saw-table extension
52 Clamping lever of the adjustable fence
53 Cover plate tab
54 Glide movement controller
55 Set screws for damping
56 Mounting holes for material clamp
57 Wing bolt
58 Threaded rod
59 Mitre angle indicator
60 On/Off switch
61 Laser on/off switch (for marking of cutting line)
62 Screws for insert plate
63 Clamping screw of the material stop
64 Adjustment screw for laser position (flush levelling)
65 Screws for laser protection cap
66 Fastening screw for laser mounting plate
67 Fastening screw for laser housing
68–70
Set screws for 0° basic setting (bevel angle)
Bosch Power Tools