Table of Contents
Advertisement
Knowledge Center -----------------------------------------------------------------
1
AP Isolation: Isolates clients connecting to the primary SSID.
2
Beacon Interval: A time interval between any 2 consecutive Beacon packets
sent by an Access Point to synchronize a wireless network. Do NOT change the
default value of 100 unless necessary.
3
Fragment Threshold: Specify a Fragment Threshold value. Any wireless
packet exceeding the preset value will be divided into several fragments before
transmission. DO NOT change the default value of 2346 unless necessary.
4
RTS Threshold: If a packet exceeds such set value, RTS/CTS scheme will be
used to reduce collisions. Set it to a smaller value provided that there are distant
clients and interference. For normal SOHO, it is recommended to keep the default
value unchanged; otherwise, device performance may be degraded.
5
DTIM Interval: A DTIM (Delivery Traffic Indication Message) Interval is a
countdown informing clients of the next window for listening to broadcast and
multicast messages. When the packets arrive in the router 's buffer, the router will
send DTIM (delivery traffic indication message) and DTIM interval to alert clients
of the receiving packets.
43
Advertisement
Table of Contents
