Table of Contents
Advertisement
6.5 Operation of control, resolution, name change etc. of input / output
cards.
1) Input card:double click the input signal in "SWITCH " interface, pop-up interface in
figure 6.5.1 , in "control" column in which we can control the camera and other equipment
connected to the card(this function needs to ask suppliers for relevant information,
command sent form see table 1). The video control column can adjust the brightness
and contrast of the input card, and the operation of the card reset. In the name column, we
can enter a new name, and click "name" to change the name of the current input signal.
Figure 6.5.1 Input card central control, video control, name operation interface
2)Output card:double click the output signal in "SWITCH " interface, pop-up interface in
figure 6.5.2 , in "control" column in which we can control the camera and other equipment
connected to the card(this function needs to ask suppliers for relevant information,
command sent form see table 1).In video control column we can choose various
resolutions of the output card, adjust the brightness, contrast and saturation of the
image.In the name column, we can enter a new name, and click "name" to change the
name of the current input signal.
19
Advertisement
Table of Contents
