Table of Contents
Advertisement
6.2 Touch screen control instructions
S-MIX-PRO series matrix can control the matrix through the front panel HD touch
screen, which contains four operating interface,that is VIEW , SWITCH, SCENE, SETUP .
1.VIEW interface: as shown in Figure 6.2.1,this interface can show current input and
output status of the matrix, the figure 6.2.1 says the current sixth input signal switching to
output signal 02, 03, 04, 06, 07, 08, while the current input and output can be saved in the
right side of the interface, it has 13 scenarios from 01 to 13 for users, select any number
from 01 to 13 , click "SAVE" to save the scene (00 is the current real-time state of matrix ,
not optional).
Figure 6.2.1 VIEW interface
2.SWITCH interface：As shown in Figure 6.2.2. this interface mainly to switch video
signals, figures below SWITCH-INPUT is the input signal selection area,
SWITCH-OUTPUT is digital signal output selection region, the button on right side from
top to bottom respectively is UnPickALL (choose all options), PickALL (cancel all options),
Apply, Preview, Undo, Take, the specific switching steps are as follows:
First select the input signal, as shown in Figure 6.2.2 select the input signal "08",
after selection the number is red, the input can only choose one, the output signal can be
11
Advertisement
Table of Contents
