Troubleshooting; Care & Maintenance; Specifications; Customer Support - ACU-RITE 00398 Instruction Manual

Troubleshooting

Problem
"CHECK PROBE"
is displayed
Display screen
not working
If your AcuRite product does not operate properly after trying the troubleshooting
steps, visit www.AcuRite.com or call (877) 221-1252 for assistance.
Care & Maintenance
Store in a dry location at room temperature. Clean thermometer with a soft, damp
cloth. Temperature probe should be wiped clean with warm water immediately
after direct contact with foods.
DO NOT place display on or near hot surfaces. DO NOT heat beyond thermometer's
temperature capacity. DO NOT use in oven. DO NOT wash in dishwasher. DO NOT
immerse in water or use caustic cleaners or abrasives. DO NOT allow any part of the
temperature probe or probe wire to come into direct contact with flames or flare-ups. DO
NOT bend or crimp the temperature probe cord. DO NOT lift or move the thermometer by
the temperature probe wire connection.

Specifications

TEMPERATURE RANGE
TIMER RANGE
POWER

Customer Support

AcuRite customer support is committed to providing you with best-in-class service.
For assistance, please have the model number of this product available and
contact us in any of the following ways:
(877) 221-1252
Visit us at www.
Installation Videos
►
Instruction Manuals
►
Solution
"CHECK PROBE" indicates a probe error. Probe cord is
not functioning properly. Cord may have been damaged or
exposed to extreme heat.
• Check the wire and connection for damage or excessive
heat. Replace cord.
Probe cord is not connected to the thermometer.
• Verify cord connection is secure or reconnect cord.
• Check that the batteries are installed correctly. Batteries
may need to be replaced.
-40ºF to 482ºF (-40ºC to 250ºC)
Probe cord heat resistant up to 700ºF (371ºC)
99 minutes, 59 seconds
2 x AAA alkaline batteries
AcuRite
Replacement Parts
►
Support User Forum
►
.com
►
►
7
Register your Product
Submit Feedback & Ideas