Table of Contents
Advertisement
Troubleshooting
Inaccurate
temperature
Display screen
not working
Specifications
TEMPERATURE RANGE
HUMIDITY RANGE
POWER
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
Such modifications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.
• Make sure both the display unit and wired
temperature sensor are placed out of direct sunlight
and away from any heat sources or vents.
• Check that the battery is installed correctly. Battery
may need to be replaced.
Display: 32°F to 122°F; 0°C to 50°C
Wired Sensor: -58°F to 158°F; -40°C to 70°C
Display: 10% – 99% RH (relative humidity)
1 x AAA alkaline battery
6
Advertisement
Table of Contents
