Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits DISPLAY UNIT 10. “MAX/MIN” Button 1. Current Outdoor Temperature Press to view the lowest/highest 2. Outdoor Sensor Low Battery temperatures recorded since midnight. Indicator 11. Display Low Battery Indicator 3. “max” indicator 12. Outdoor Sensor Signal Strength Indicates today’s HIGH records are being viewed.
SETUP Install or Replace Batteries AcuRite recommends high quality alkaline batteries for the best product performance. Heavy duty or rechargeable batteries are not recommended. The outdoor sensor requires lithium batteries in low temperature conditions. Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries in the outdoor sensor for temperatures below -4ºF / -20ºC.
Set the Time Press and hold the “SET” button for 3 seconds to enter the SET mode. Once in SET mode, the preference you are currently setting will blink on the display. To adjust the currently selected (flashing) item, press the “+” button. To save your adjustments, press and release the “SET”...
Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and dust. Display unit stands upright for tabletop use or is wall-mountable.
OPERATION Using the Thermometer High/Low Records Today’s high and low values are recorded for indoor and outdoor temperature. The high and low records automatically clear at 12:00am. To view the HIGH temperature record, press and release the “MAX/MIN” button. The “MAX” icon appears on the display next to the high records. To view the LOW temperature record, press and release the “MAX/MIN”...
Troubleshooting If the wireless signal indicator shows no bars: Relocate the display unit and/or the outdoor sensor. The units must be within 165 ft (50 m) of each other. Make sure both units are placed at least 3 feet (.9 m) No outdoor sensor away from electronics that may interfere with the reception...
Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Outdoor Sensor Care Clean with a soft damp cloth. Do not use caustic cleaners or abrasives. Specifications TEMPERATURE RANGE Outdoor: -40ºF to 158ºF;...
Customer Support AcuRite customer support is committed to providing you with best-in- class service. For assistance, please have the model number of this product available and contact us in any of the following ways: (877) 221-1252 info@chaney-inst.com AcuRite 24/7 support at www. .com Installation Videos Register your Product...
Need help?
Do you have a question about the 00782W and is the answer not in the manual?
Questions and answers