Sharp MX-4111N Technical Handy Manual page 59

SHARP
PAPER PATH & TRANSPORT
ALL POD1_S jams in fuser
OUTPUT DEVICE [FINISHER]
Fold alignment drifts after producing 3
or 4 booklets, only when using A3W
MX-FN18
paper size with the MXFN18 saddle
Remove paper from offset tray
MX-FNX9
message after each set is complete
SHARP OSA
OSA
File name cannot be customised when
Network
using Sharp OSA-Network Scanner
Scanner
Tool
Under External Account control (OSA),
is it possible to lower the Automatic
Log Out (User) timer from 60
Unable to enter the URLs for EAM
(External Accounting Mode) as the
ALL
item is missing from the webpage,
even though MXAMX3 is enabled.
Is it possible to activate a trial mode
SHARPDESK MOBILE
Which additional options are required
for full functionality when using
Sharpdesk Mobile via a wireless
ALL
Unable to connect to Office 365 email
account when using Sharpdesk Mobile
finisher.
Tool v1.1
seconds?
for Sharp OSA?
access point?
v2.0
If a paper jam is incorrectly removed , the Fusing rear
lower paper guide sheet ( PSHEP6378FCZZ ) may be
bent over , causing POD1_S jams . Straighten guide
sheet , then test . Replace if damaged.
Upgrade the MXFN18 Saddle Firmware to 01.02.03.a0
(or higher)
Check the operation of FSLD1 & FSLD2.
Both sensors should be OFF when the paper surface
detect lever (PG Section 12, item 6) is at Home position
therefore, if FSLD2 remains ON (using SIM 3-2), check if
the sensor is located (fixed) correctly onto the frame.
Download an updated web module from the Sharp
support website and copy it into the Sharp OSA-
Network Scanner Tool Host Installation Folder:-
eg. C:\Program Files\Sharp\Sharp OSA Network
Scanner Tool Host\OSANSTWeb\bin
Afterwards, reboot the Host Server/PC.
Under User Control - Default Settings menu, enable
Automatic Logout Setting and change to the required
time (eg. 30 seconds).
Check the setting for Sim 26-03 (Coin Vendor Mode).
Ensure OUTSIDE AUDITOR is configured to None.
Sharp OSA trial mode supporting most functions can be
enabled by executing Sim 26-74 (restricted to approx
32000 pages, including print/scan/copy/image send).
Only MX-PK11 is required.
When using Office 365, you need to specify the
following information within Email Server Settings on
Sharpdesk Mobile:-
Hostname: m.outlook.com
Port Number: 993
REPAIR HINTS
SSL: ON
59