Table of Contents
Advertisement
When positioning yourself to acquire a GPS signal, avoid the following environments:
• Inside buildings or rooms, or underground areas or tunnels
• Near high-voltage wires, television towers, tall buildings, tall trees, or overhead electrical wires for
trains or buses
• Locations with concentrated electronic interference, such as construction sites and heavy traffic
• Under water or floating on water
If you have issues acquiring a signal, move into as open an area as possible. If you still cannot acquire a
signal, select Skip on the GPS screen to start your workout. Distance traveled will be estimated based
on your stride until the GPS signal is fully acquired.
Parent topic:
Setting Up the Product
Related references
Solutions to GPS Signal Problems
Connecting the Watch to a Smartphone Using Bluetooth
You can connect your watch to a smartphone using Bluetooth. Before you begin, be sure to download
the Epson View app on your smartphone.
Note: Do not directly connect to your watch from the Bluetooth settings on your smartphone. The Epson
View app will pair your smartphone with your watch.
1. At the Time screen, press the
Enter button.
You see a screen like this:
2. Select Bluetooth.
3. Select Pairing.
25
Advertisement
Table of Contents
