Epson ProSense 57 Quick Start Manual

Buttons
GPS Running Watch
57
Quick Start Guide
Make sure to read the Notices sheet and online User's Guide
before using the product to ensure safe use.
Back Up
Start/Stop Enter
Down
Wearing Your Watch
Wear the product snugly
around your wrist as shown.
Tighten the watch if your
pulse is not measured
correctly while exercising.
ProSense57_QSG_E_CPD54150_2pages.indd 1
1 2
Charging the Watch Setting Up the Watch and App
Use the included USB charging clip to charge The Settings screen appears on the watch after
the watch. you remove the USB charging clip.
1 1
Connect the USB charging clip to the watch. On the watch, select your language and
press Enter.
2
Select Set by Phone and press Enter.
2
Connect the USB cable to your PC or the
optional AC adapter.
Note: You can also use a PC to configure the
watch or you can configure the watch on
Make sure the watch is fully charged before you
its own. See the online User' s Guide for more
remove the clip.
information.
3 5
Download and install the Epson View app Note the code that appears on the watch.
from your smartphone's app store.
4
Launch the Epson View app and create
an account or log in. After you finish this
process, the initial Settings screen appears
on your smartphone.
6 Select ProSense 57 from the list on your
smartphone, then follow the instructions to
pair your watch and your phone.
Note: Once you have completed the initial
setup, you can use the Epson View app to
customize the workout screens, change
settings, and link to third-party fitness apps.
The Time screen appears on the watch when
the process is complete.
Note: You can pair the watch with your
smartphone at any time by selecting My
Watch in the Epson View app.
3
Using Your Watch
Selecting a Workout Mode
The following workout modes are available:
1
Press down on the Time screen to display
Run Walk Treadmill
the workout mode screen.
3
Press Start/Stop while outdoors with no
Note: You can press Start/Stop on the
Time screen to quickly start a run. obstacles overhead to start GPS calibration.
2
Press up or down to select the You can start your workout when the
desired activity. Measurement screen appears.
For increased GPS accuracy, wait at least 15
minutes before starting your workout. You
only need to perform this extended GPS
calibration the first time you use the watch
or if you do not use it for a few months.
Note: If you see the message below, do one
Note: You can press Enter during a
of the following:
workout to start and record a new lap.
•
Move to an area with no obstructions
overhead and then press back to
restart GPS calibration.
• Press Enter to start the workout.
Distance traveled will be estimated until
the GPS signal is fully acquired.
Press up or down during a workout to
change the measurements that appear. See
the online User' s Guide for more information.
Starting a Workout
Press Start/Stop on the Measurement
screen to start a workout.
7/14/17 2:11 PM