Table of Contents
Advertisement
Firmware updates
The latest firmware updates can be downloaded from the Oartec website www.oartec.com/otm-2
The OTM uses a USB flash drive to transfer the file from your computer to the OTM.
Press MENU button
ARROW to Information
Press OK
Setting Drag Factor
The flywheel resistance setting on the DX can also be displayed as a numerical Drag Factor value.
Navigate to the Drag Factor screen and row a few strokes to see the DF value for that resistance setting.
Changing the position of the intake dial will increase or decrease this value.
The higher the value the higher the resistance.
ARROW to Firmware Update
Press OK
Download the latest OTM firmware version
from www.oartec.com/otm-2
Upload OTM firmware file to USB flash drive.
Insert flash drive into OTM.
Make sure latest OTM firmware
version is on the USB and the USB
is properly inserted into OTM.
Press OK to start update process.
Wait for successful update and exit.
6
Advertisement
Table of Contents
