Table of Contents
Advertisement
2. Operation
Turning the OTM On/Off
The OTM is programmed to automatically power on once you start rowing.
It will start in Just Row mode where if you continue rowing, the distance and time values will start to count up.
Alternatively turn the monitor on by pressing the MENU/BACK button. It will open with the main menu screen.
To manually turn the monitor off, press and hold the MENU/BACK for 3 seconds until it powers off.
The OTM will also automatically turn itself off after no activity for 3 minutes.
Main Menu/Navigation
The OTM opens to the main menu screen.
Press UNIT button
to select between
Time/500m, Watts
and Calories.
Press DISP button
to select between
display options.
Pairing Heart Rate
The OTM is compatible with all Ant + protocol heart rate chest belts.
The OTM will automatically detect the closest available ANT + heart rate belt and display the value on the display
screen top left hand field.
The OTM has a detection range of about 8 – 12 ft/3 – 4 metres. If the OTM loses connection with the heart rate
belt it will pause on the last detected transmission before showing no value at all.
WARNING: Heart rate systems may be innaccurate due to interference or fluctuation in chest belt
transmission. Please immediately stop activity if you feel faint or overwhelmed. Over-exercising may result
in serious injury or death.
The OTM automatically pairs to the closest available ANT + heart rate chest belt.
Press the ARROW UP/DOWN
button to navigate through the
menu options.
Press OK to select option.
Press MENU/BACK to move
back a step or return to the main
menu.
4
Advertisement
Table of Contents
