Getting Started; Installing The Batteries; Setting Date And Time - OARTEC OTM-2 Operation Manual

1. Getting Started

Please read the following procedures before using your OTM-2 for the first time.

Installing the Batteries

The OTM-2 uses 2 x alkaline D cell batteries which are provided. Follow the simple process to install the batteries.
Loosen the knob that
holds the battery cover.
Remove battery cover.

Setting Date and Time

Before you use the OTM for the first time, please ensure that the correct date and time are set. Once time and date
are set it will remain current, even when replacing the main batteries, as the OTM has a smaller back up battery to
maintain the time and date setting from then on.
To set date and time follow the simple procedure below.
Press MENU button
ARROW to Information
Press OK
Check the +/- orientation of
the battery compartment.
ARROW to Set Date and Time
Press OK
Install 2 x D cell batteries.
Edit values using ARROW button.
Press UNITS to select fields.
Press OK to complete.
Replace battery cover
3