Electronic Speed Control - Chrysler 300 2016 User Manual

O P E R A T I N G Y O U R V E H I C L E
• If your vehicle is equipped with a touchscreen, the dimming is programmable through the
Uconnect system. Refer to "Uconnect Settings" in "Understanding Your Instrument Panel" in
the Owner's Manual on the DVD for further details.
Ambient Light Dimmer
• Rotate the ambient light control up or down to increase or decrease the brightness of the
release handle, map pocket (if equipped), overhead and floor lighting when the parking lights
or headlights are on.
• Rotate to extreme bottom position to turn off.

ELECTRONIC SPEED CONTROL

When engaged, the Electronic Speed Control takes over accelerator operations at speeds
greater than 25 mph (40 km/h).
The Electronic Speed Control buttons are located on the right side of the steering wheel.
NOTE:
In order to ensure proper operation, the Elec-
tronic Speed Control System has been de-
signed to shut down if multiple speed control
functions are operated at the same time. If this
occurs, the Electronic Speed Control System
can be reactivated by pushing the Electronic
Speed Control on/off button and resetting the
desired vehicle set speed.
To Activate
Push the ON/OFF button to activate the elec-
tronic speed control. CRUISE CONTROL
READY will appear on the instrument cluster
to indicate the electronic speed control is on.
To turn the system off, push the ON/OFF
button a second time. CRUISE CONTROL
OFF will appear on the instrument cluster to
indicate the electronic speed control is off. The
system should be turned off when not in use.
Leaving the Electronic Speed Control system on when not in use is dangerous. You could
accidentally set the system or cause it to go faster than you want. You could lose control and
have an accident. Always leave the system off when you are not using it.
Electronic Speed Control Switches
1 — Push Cancel
2 — Push Set+/Accel
3 — Push Resume
4 — Push On/Off
5 — Push Set-/Decel
WARNING!
45