Table of Contents
Advertisement
WHEELS AND TYRES
Warning triangle
The warning triangle is used to warn other road
users of a stationary vehicle.
Storage and folding up
330
Lift the floor hatch and take out the warning
triangle.
Take the warning triangle from the case, fold
out and assemble the two loose sides.
Fold out the warning triangle's support legs.
Follow the regulations for the use of a warning
triangle. Position the warning triangle in a suita-
ble place with regard to traffic.
Ensure the warning triangle and its case are
properly secured in the cargo area after use.
NOTE
If the car has been locked with privacy locking
then the boot lid/tailgate and floor hatch can-
not be opened, see Privacy locking* (p. 171).
Tools
Amongst other things, the car contains towing
eye, jack* and wheel wrench*.
The car's towing eye, emergency puncture repair
kit and the tool for the plastic wheel bolt caps are
located behind the hatch on the left-hand side of
the cargo area. There is also space for the sleeve
for the lockable wheel bolts. Jack* and wheel
wrench* are located in a bag on the cargo area
floor.
If the car is not equipped with the accessory
spare wheel then the jack need not be stored in
the car.
* Option/accessory, for more information, see Introduction.
Advertisement
Table of Contents
