Making Calls On The Earphones - Sennheiser Momentum Instruction Manual

Making calls on the earphones

24 | M2 IEBT
Making calls on the earphones
The following call functions are only available when the earphones and the
smartphone are connected using Bluetooth or USB cable. Some smartphones
may not support all functions.
Making a call
Dial the desired number on your smartphone.
X
If your smartphone does not automatically transfer the call to the
earphones, select the M2 IEBT Wireless as the audio source on your
smartphone (see the instruction manual of your smartphone if necessary).
Accepting/rejecting/ending a call
If your earphones are connected to a smartphone and you receive a call, the
control panel on the neckband vibrates and the ring tone is played in the
earphones. If the battery level of the earphones is sufficient, the LED flashes
blue; if not, the LED flashes red.
If you are playing music when you receive a call, the music pauses until you end
the call.
Press the Play/pause button accordingly:
X
Press Function
1x
1x
1s
1x
1
2
2x
HOLD
2x
1
2
HOLD
2x
2
1
HOLD
1s
2 1
Signal
Accepts a call
Ends a call "Call ended"
Rejects a call "Call rejected"
Accepts an incoming
call and ends the
active call
Puts the call on hold
Accepts an incoming
call and puts an active
call on hold
Toggles between 2
active calls
Rejects an incoming
call and continues the
active call