Sennheiser Momentum Instruction Manual page 18

Getting started
16 | M2 IEBT
Pairing the earphones with a Bluetooth device
Ensure that the earphones are within the 20 cm range of your smartphone when
performing this procedure.
1. Switch the earphones on (see page 18).
– If you pair the earphones to the device for the first time, they automatically
go to the pairing mode.
– If the headphones don't automatically go to pairing mode, switch the
headphones off and press the Power button again for 4 seconds or until
you hear the voice prompts "power on" and "pairing".
The LED flashes blue and red. The earphones are in pairing mode.
2. Activate Bluetooth on your smartphone.
On your smartphone, start a search for Bluetooth devices.
3.
All active Bluetooth devices in the proximity of your smartphone are
displayed.
4. From the list of found Bluetooth devices, select "M2 IEBT". If necessary, enter
the default PIN code "0000".
If pairing was successful, you hear the voice prompts "connected". The LED
flashes blue 3 times.
Menu
Bluetooth on
Bluetooth off
*** M2 IEBT
*** M2 IEBT
Keyword: 0000
If no connection is established within 5 minutes, pairing mode is terminated
and the earphones return to the disconnected state. Switch the earphones
off and repeat the pairing procedure.
› power on ‹
› pairing ‹*
1s 1s
20 cm
2
Menu
Add Device
1
2s
3
4
› connected ‹