Sennheiser Momentum Instruction Manual page 17

Getting started
Pairing the earphones with a Bluetooth device using NFC
The following sections describe, using a smartphone as an example, how to pair
your M2 IEBT Wireless neckband earphones with a Bluetooth device using NFC.
If the instructions provided do not work on your device, proceed as described in
the instruction manual of the device.
You can pair the headphones to other devices using NFC regardless of the
headphones' power state (on or off).
1. Activate NFC on your smartphone.
2. Scan the smartphone to the NFC panel on the left
You hear the voice prompts "Power on" and "pairing". The LED flashes blue
and red.
3. Click "Yes" if the pairing confirmation dialog appears on the screen of your
smartphone (this step may vary depending on your smartphone).
If pairing is successful, you hear the voice prompt "connected". The LED
flashes blue 3 times.
Menu
NFC on
NFC off
1s
panel
1
1s
Connect to Bluetooth device?
Yes
No
› connected ‹
of the neckand.
2
3
M2 IEBT | 15