Mitsubishi Outlander 2018 Owner's Handbook Manual page 14

5. At the garage door opener receiver (motor-head unit) in the garage, locate
the "Learn" or "Smart" button. This can usually be found where the hanging
antenna wire is attached to the motor-head unit (see the garage door opener
manual to identify the "Learn" button.
6. Firmly press and release the "Learn" or "Smart" button. (The name and color
of the button may vary by manufacturer.) There are typically 30 seconds to
initiate step 7.
7. Return to the vehicle and firmly press, hold for 2 seconds and release the
programmed HomeLink button. Repeat the "press/hold/release" sequence a
®
second time, and, depending on the brand of the garage door opener (or other
rolling code equipped device), repeat this sequence a third time to complete
the programming process. HomeLink
equipped device.
NOTE: Some hand-held transmitters may actually train better a distance of 6 to
12 inches. Keep this in mind if you have difficulty with the programming process.
HOMELINK (IF EQUIPPED)
®
should now activate your rolling code
®
13