PTT Bracket
Base
Adjustment
Knobs (2)
Tilt Adjustment
Note: the optional camera heater board is not
shown for reasons of clarity.
Loosen the two adjustment knobs on the PTT
bracket and tilt the lens to the desired viewing
angle. The adjustment knobs are also used to
position the lens for proximity to the dome. See
Figure 4-3 on page 18 for lens rotational
adjustment.
FIGURE 4 – 2
Directional Adjustment, Tilt and Vertical
PTT Locking Knob
Lens
17
VRB
Vertical
Adjustment