Next Steps - Palm Treo 600 Quick Start Manual

15. The device software has been installed to your PC and is ready to be downloaded to your
Treo 600.
16. Attach the Treo 600 to the cable or cradle attached to your PC.
17. Launch the HotSync application on the device and tap the
HotSync icon in the middle of the screen.
18. After the HotSync is completed, the device is ready to synchronize
with Wireless Sync.
19. Remove the cable from the device.
20. If not already open, launch the Wireless Sync Client on the Treo
600 by tapping on the
21. Tap (single tap) on the "
Sync.
22. On the first sync event you will be prompted to Refresh or Merge
the data in Wireless Sync with the data on the device.
If you selected Corporate email or Both when configuring your
email source, it is recommended to select the Refresh option.
If you selected Internet email as your email source, it is
recommended to select the Merge option.
23. You may be prompted to scribble on the screen to generate the
unique encryption key for your device. Continue to scribble until
the progress bar completes and the sync continues.
24. After the key is generated, you will be asked to enter your
password.
25. Enter your Wireless Sync password and tap the OK button to
continue with the sync.
26. Your device is configured and synchronized with Wireless Sync.
Keep your device powered on and you will continue to get your
information pushed to you!

NEXT STEPS:

-
If you selected the Corporate email option for your email source, please continue with
the configuration of your PC Monitor. Refer to the Quick Start Guide for Microsoft
Exchange or Quick Start Guide for Lotus Domino for more information. Once the PC
Monitor is configured, you will begin to receive your email and PIM (calendar, contacts,
tasks and notes) data wirelessly.
-
If you selected the Internet email option you will begin to receive your email after the
Wireless Sync server has successfully loaded your messages from the email source.
This may take several minutes depending on the amount of mail on your server.
icon in the applications screen.
Sync" button to initiate a Wireless
©2005 Verizon Wireless
8